DIY: Bridesmaid Bouquets

These were basically pre-made bouquets from Michael's. I believe they were originally $7.99, but I used a coupon for each one making them only $3.99 each. (I typically wouldn't have gone with a pre-made bouquet but I love the color of these roses.) And since you can only use one coupon per transaction, I also enlisted my sister (the MOH) and the fiance to each purchase one with one of my coupons so we could condense our trips to Michael's.   :-)

Ok, so then I just wrapped each bouquet in standard brown satin ribbon. They still looked like they were missing something. So I put a single strip of lace, left over from my DIY lace hair flower, around the middle and then inserted 3 diamond type pins in the stems. During the process I arranged the flowers like I wanted them, but then some of the stems were a little too long so I had to trim the ends (see tip below).

I absolutely looooooove them. I can't explain it. They are just the epitome of everything I want in my wedding... they've got the pink, the brown, the lace, the romantic/rustic feel to them.  I. LOVE. THEM.

TIP: Don't cut your finger with scissors during the process like I did. It was quite a deep cut, and was bleeding everywhere and definitely impeded my DIY attempts today. However, now my bridesmaids can know that I put LITERALLY my blood, sweat, and tears into their bouquets. I'm sure they'll love that thought....

These are also going to be sitting on the head tables as decoration at the reception. I will be putting glass jars (recycled from things we use at home so these were free) at several spots along the table for each girl to sit their bouquet in.

DIY: Lace hair flower

Hello again! Long time, no blog!

Threw this random DIY project together as I was recently thinking about how heavy my veil is, which means I may not wear it the entire reception. So, I thought of creating a hair flower.

Supplies:
- 1 sheet of felt (30 cents at Michael's)
- Scissors
- Glue gun and glue stick
- A couple feet of lace (found whole spool on sale at Joann Fabrics for $2.50. Forgot to measure exactly how much I used, but I'm guessing it's around 2 feet or so)
- Decorative button to use as center of flower. (Got mine on sale at Joann Fabrics for $2)
- Hair clip or pin to glue on back.

-Cut out 2 inch circle from sheet of felt.
- I cut my lace off of the seam but I imagine you could probably use it as is, but I liked the look of the flat lace.
- Using hot glue gun start gluing one long section of lace around the felt circle so that there is about 1/2 inch of lace hanging off the outside of the circle.
- Once you have completed one rotation around the felt circle, cut the lace where the edges meet.

Here's what it looked like at this point:

- Start gluing another section of lace onto the flower (cut lace length-wise to make thinner if you so desire. This should be based on how big your felt circle is and how wide your lace is) to make a smaller circle inside (and on top of) the this one.
- Glue a final even smaller circle of lace inside the second one. (hard to explain, but the final picture should hopefully explain it better than I can.)
- Hot glue your decorative button of choice into the middle of the flower covering the visible edge of the smallest lace circle that you just created.
- Finally, hot glue your hair clip or pin of choice onto the back.

You could glue a hair clip on the back like I did but there are also a lot of other possibilities. It could be attached to a headband, could be a broach with a safety pin on the back, or glue a long length of ribbon on the back and it could be a sash of some kind.

365 days and counting!!!

I've been a deadbeat bride (and a deadbeat blogger) lately in terms of DIY projects (and postings).

However, I would just like to make sure it's known that today marks exactly 1 year until our wedding day!

I can't wait to marry him!  <3

Yup, that's the man I'm marrying!

Thursday I was feeling a little down. Alex noticed and hates when I feel sad and tries to cheer me up.
Friday morning comes along...and this is what happened:

Alex leaves for work before I wake up, but he knows my routine.  So, I wake up and go to feed my 2 cats. It's the first thing I do every morning as they are always waiting right by the bedroom door when I wake up and are ready to be fed NOW. lol.

So I go the closet to get the cat food and there's a post-it stuck there:

Then I head to the bathroom to shower. On the bathroom door is another one (which I forgot to take a picture of) that say "Love You!"

Then I go in the bathroom and on the bathroom mirror is this one (Please ignore the 1970s tile in my apartment bathroom. haha):

Then after I've finished getting ready and am heading out the door to work, I find this one on the inside of our front door:

And that's one of the MANY reasons that I am marrying this man.  :-)

I want to win.....

... the giveway at Bridal Gown Blog, that is.  I entered to win one of the awesome personalized hangers.

If you want to head over and enter too, here's the link:

http://bridalgownblog.blogspot.com/2010/09/its-giveaway-time.html

DIY Lovebirds Cake Topper

I'm sure many of you have seen the variety of sculpted cake toppers. From personalized brides and grooms to animals... there is a large selection.  One of my bridesmaids saw some sculpted birds for cake toppers and I LOVED them! However, these cute toppers usually come with a hefty price tag... and I just can't justify in my mind spending $40+ on a cake topper.

Enter crazy DIY bride notion to make her own.  :-)

I had no idea what to do, what I'd need, or where to start. So I just winged it. (Most of these pictures were taken with my phone as my camera was on the fritz. Sorry).

SUPPLIES:
- Sculpey clay
- Acrylic paint
- Paint brushes
- Oven
- Toothpicks
- Super glue

PROCESS:

- Ok, so I went to Michael's and bought one of the small blocks of Sculpey clay.  This is not the smallest block, but probably counts as the "medium" size at Michael's. I picked this clay because it's the kind that you bake after you've molded it. I like this idea because then I didn't have to rush or worry about changing my sculpture, since this doesn't harden just from being exposed to air for a bit... and because after baking they get very hard so I didn't have worry about messing them up from that point on.

- Ok, so... buy your sculpey and sculpt your birds. Again... I just kind of winged this part. I looked at some other pictures of clay birds for reference though. I chose to sculpt all the parts of my bird separately. The body, the wings, and the beak. I didn't really want my birds to be too realistic looking.... so adding the parts on later seemed to give me the look I was going for.  If you plan on giving your birds legs then you need to make the holes for the legs now as you won't be able to after it's baked and hardened.  Toothpicks ended up being just the appropriate size for my bird legs. (Don't leave the toothpicks in while baking, just make the holes and then remove them.)

- After you've sculpted your birds, you then bake the clay in the oven according to the directions on the side of the Sculpey package. I believe it's like 15 mintes for every 1/4 inch of thickness or something. Read the package, it'll tell you.

- Take the birds (and their various parts) out of the oven and allow them to cool completely.

-After they've cooled you can paint them any color you prefer. Also, paint their various parts and accessories. I painted by birds a pale pink and their beaks a mocha brown color.

-Add accessories. I chose to give my groom a dark brown bow tie that I sculpted from the clay too. The bride has a veil that I created by just cutting a small rectangle shape from a piece of tulle and then sewing with white thread at one end to gather it.

- Super glue the wings, beaks, and accessories onto the birds.

-Paint some eyes on. I gave mine dark brown eyes.... the bride got some cute eyelashes.

And there ya have it. They aren't perfect, but they are handmade and I adore them. And this project probably cost me about $10 total. Awesome!

DIY Coasters

Lots of lots of projects still going on. I had a long weekend from work for Labor Day so I've been doing lots of shopping and lots of DIY.  Here's the more recent one.....

SUPPLIES:
-I purchased a pack of 125 square, 4 inch, chipboard coasters from an Ebay seller for about $14.50 (including shipping).

-I already had the ink pads (have to use the pigment ink on coasters since it's water resistant) from previous projects.

-I purchased the "lovebirds" stamp and "Thank You" stamp at Hobby Lobby for about $2-2.50 each (during one of their stamp sales).

-The heat gun I borrowed from my future father-in-law, who had used it for rebuilding an old car. It's not an actual embossing gun, but it gets the job done just the same (and I didn't have to pay for one, which is awesome).

-The clear sparkly embossing powder I bought from Michael's using a 40% off coupon.

PROCESS:
- This one is pretty easy. I just took the bird stamp and inked it up with the brown ink and stamped them on the coasters. I had to get a good amount of ink on there and then press down really hard on the coaster to make sure that I got all the lines nice and complete, but they came out pretty good.
-Then I took the pink ink and the "Thank You" stamp and stamped it right below the birds. Since I was going to be embossing the pink part I had to have the embossing power open and ready to go since I have to sprinkle it on the ink immediately after stamping to ensure that it sticks.
-So, after stamping the "Thank You", sprinkle on the embossing powder.
-Shake excess embossing powder off the coaster (I shake mine into a bowl that way I can reuse it later by just funneling it back into the powder jar).
-Then take your heat gun and melt the embossing powder until you see it start to become cohesive and shiny.

*TIP: When it comes to embossing I've tried tons of inks, powders, etc.  What I found that works best and gives me the clearest image (this is especially important if you are dealing with a pretty detailed stamp) is to stamp the image with the color of ink you want and then emboss it with the clear powder. Embossing with the colored powders looks more messy for a detailed image, at least in my experience.*

All done! I LOVE them. The birds are so cute!  Not sure how my wedding theme came to involve birds, but I love it. We definitely have a rustic elegance look to most of our stuff.

Have a great rest of the week!

DIY Personalized Napkins

I'm all about having as many personal touches to our wedding as we can. Deep down one of my biggest fears is that I'll look like a generic bride and our wedding will feel like a generic "cookie cutter" wedding. That's just not my style and not what I want. Now, our isn't going to be anything crazy strange or anything like that, but I definitely want to have as many little unique personalized touches as I can.

So... as I'm sure many of you have seen on the numerous wedding sites we all visit, they sell napkins that you can have personalized with your name and wedding date. They are cute but I just can't justify spending so much money on something people are going to wipe their mouths with. So, I decided to just to a more simple DIY version.

First I got an ink pad from Michael's (again, used a coupon. I hardly buy anything at Michael's without using a 40% off coupon). You have to make sure for things like napkins that you get the pigment ink because it's water resistant. It doesn't bleed when a sweating glass is placed on it and it won't wipe off onto your guests faces (I tested it out to make sure).

I already had the clear acrylic stamp blocks from Michael's (40% off coupon again) from when I first thought we were going to attempt embossing, which didn't really work out as great as I thought. I found this little pack of "W" stamps in one of the dollar bins at Michael's during one of my many trips there. We ended up using the one in the bottom right.

Then I went to Dollar Tree and got 4 packs of 20 pale pink napkins. I also had an open pack of white from when I attempted embossing in my earlier days so I used those too.  Then I just started stamping away. I let the fiance have some say in what stamp we used. I tried several (not pictured) but he just liked the plain "w" the best. Some of the more intricate stamps don't look as clean or nice when stampng on a napkin, so that's another reason we stuck with a simple design.

Ended up with around 100 napkins for a about $7.

Nothing too fancy, but still cute.... and super easy to accomplish.

Frame and Poem for the Guestbook Table

Another quick and easy one today.

I found some frames from the dollar store that were kind of rustic looking. They gave me the shabby chic vibe that I was going for.... except they were totally the wrong color. Their original color (which I forgot to photograph) reminded me more of an outhouse, which isn't really the vibe I'm going for at my wedding.

So.... last weekend I went to BM Tonja's house and we had a spray paint party. She was nice enough to let me use their deck and help me paint. (It's a little hard and kinda unsafe to be spray painting in my apartment, I guess.)

So I spray painted the frames ivory. They came out pretty good. I am thinking of making them a little more "rustic" by using some sandpaper on them to give them that antique/vintage vibe, but I haven't officially decided yet.  Then I typed up a poem to put in the frame to kind of explain our guest "book".

I've never really been a fan of the traditional guestbook, just because I'd hate to just put it away on a shelf and that be the end of it. So months ago I came across this photo (Sorry, can't remember where or I'd give credit where credit is due.) and knew that's what I wanted to do. We went to a second hand record shop and each bought a record of our favorite old bands. I picked an album by "The Doors" (I Loooove me some Jim Morrison) and the fiance picked an album by "Led Zepplin". We'll have the guest sign them with paint pens and then hang them in some collectible display cases (larger than the one pictured) that I got on sale at Michael's a few months back.

Anyway.... so I typed up the poem and put it in the frame. The first 2 lines I read somewhere on the web (again, I'm bad about remembering where I saw things. Sorry) and the rest I just made up. It's not perfect, in my mind, but I'm trying not to be a perfectionist when it comes to all things wedding. And since this is something that most people may not even read I didn't want to spend too much time on it.

In case you can't read it, the poem says:

Instead of a guestbook

stuck in a drawer,

Alex and Samantha

thought they would do more.

Please sign your name

or leave them a note,

so all their lives

they can read what you wrote.

Thank you for sharing

in their wonderful day,

and for helping to celebrate

in your own special way.

DIY Flower Girl Basket

This one is quick and easy.

First I found a cheap small wicker-type basket from Goodwill. (I often frequent the 50% off Saturday sales, so I got this basket for about 50 cents!)

Then I picked up a can of spray paint from Wal-mart in my desired color. I chose Krylon's "ballet slipper" pink.

So then I painted the basket in the pink color and got some chocolate brown ribbon on sale at Michael's to tie on each side of the basket.

Ta-da! Finished product: